Please search and download "Amaryllo AI" APP to get started.
★ Make sure your smart phone is connected to the same Wi-Fi network
3. Power on the device
Attach the network cable from the camera to Ethernet jack and plug the power adapter into power outlet. Please be sure to waterproof the connection area if camera is placed outdoor. After the device is powered on, the start-up calibration will take approximately 25 seconds.
Note: The LED on both sides may be warm to touch when in use.
4. Setup camera in the APP
Select AR3S in the APP then follow the instructions shown.
★ Please refer to the FAQ page for more info on how to share the viewer or administrator rights to other smart phone devices.
5. Connect camera to the Internet
Please make sure that your smart phone is connected to the same Wi-Fi SSID network.
After selecting AR3S, you will be given Internet setup options.
Select Auto-Detection (Recommended)
6. Select AMID to complete setup
Tap on the AMID to complete auto setup.
Note: AMID can be found on the bottom of the device. Make sure the AMID is the same as one which appears in APP setup.
7. App setup complete
Congratulations!Your AR3S is set up and ready to go.
Note: The camera is designed for easy DIY installation but if you need local assistance, please visit www.SoteriaAi.com to locate a professional installer near you.
★ Please be sure your device is running on the latest firmware.
8. Mount your camera
Mount the base onto the ceiling and make sure it is tightly secured with the provided screws.
Screw the camera into the mount then turn the camera body counter clock wise. The connection should be snug, but not over-tight.
Unlock the hatch
★ User QR code to setup device
Make sure your phone is connected to the same Wi-Fi router as your camera.
A QR code will be generated when you enter in the Wi-Fi password.
Show the QR code to the camera. You will hear a beep sound when setup is successful.
★ You may sit the camera on a surface
★ LED indicator
Power indicator (Blue LED) Solid Blue LED : Device is powered on
Flashing Blue LED : Camera is being accessed remotely
Wi-Fi indicator (Green LED) Solid Green LED : The device is connected to the Wi-Fi
Flashing Green LED : Camera is attempting to connect to a Wi-Fi AP router.
★ Factory reset
Make sure your camera is powered on.
Initial power on camera rotation is complete.
Poke the factory reset hole with a pin and gently press down on the button (3-5 seconds) until you hear a beep.
Reset will take up to 25 seconds. The Blue LED indicator begins to flash when reset is complete.
★ Add another Wi-Fi source
Please ensure your mobile device is connected tot he same Wi-Fi network.
Poke the WPS button with a pin and gently press down on the button (3-5 seconds) until you hear a beep.
Tap "Add WiFi" in the app and enter the password.
Position the QR code that's generated in the APP in front of the camera lens. (The suggested distance is 15-30 cm)
★ Safety guideline
We designed AR3S to be durable and easy to use. Here are some safety guidelines that you should follow when using Amaryllo cameras.
Avoid placing the camera under direct sunlight/rain
Use only the provided power adapter and cable for your camera.
Use AR3S within its operating temperature -40° to 140°F (-40° to 60°C)
★ When installing the camera outdoor, please be sure to secure the flat base onto the ceiling surface.
★ Need help? Visit http://www.amaryllo.eu/support or drop us an email with photo or video and description of the problem to firstname.lastname@example.org